Turbidity and suspended solids sensor
Turbimax CUS50D

Turbimax CUS50D is a turbidity sensor for industrial wastewater and process applications. ©Endress+Hauser

Turbimax CUS50D is made for industrial wastewater and process applications. Its sensor head consists completely of a robust, dirt-repellent Teflon derivative.

The sensor housing of Turbimax CUS50D is available in stainless steel and plastic. ©Endress+Hauser

The sensor housing of Turbimax CUS50D is available in stainless steel and plastic.

Turbidity is the cloudiness of a liquid caused by suspended particles. This video shows how turbidity measuring principles work.

Memosens sensor for turbidity, suspended solids and absorption measurement

Turbimax CUS50D is a smart sensor that allows unattended operation in a wide range of industrial wastewater and process applications. Its absorption principle enables single-point-calibration. Choose from different integrated analytical models to adapt the sensor to your specific application. With Memosens digital technology, Turbimax CUS50D combines maximum process and data integrity with simple operation. It resists corrosion and enables lab calibration.

  • Benefícios

    • High level of measurement accuracy and repeatability for stable measurements – in the middle and high turbidity measuring range

    • High chemical resistance, low maintenance required: Sensor head consists completely of a dirt-repellent Teflon derivative.

    • ...

  • Campo de aplicação

    Turbimax CUS50D measures turbidity, suspended solids and absorption in:

    • Industrial wastewater and utilities:
      - Measurement of the solids content in process and wastewater sludge
      - Flocculent dosing via absorption measurement
      - Concentration...

Características e especificações

Voltar

Details

  • Measuring principle

    Absorption

  • Application

    Absorption sensor for turbidity and suspended solids measurements in industrial wastewater and processes

  • Installation

    Insitu (immersion in process or retractable assembly)

  • Measurement range

    40 to 4 000 FAU,
    0 to 60 g/L suspended solids,
    0 to 10 OD

  • Measuring principle

    Absorption

  • Design

    40 mm sensor

  • Material

    sensor head: PCTFE
    sensor shaft: 1.4571 stainless steel (316TI) or plastic (PPS GF40),
    o-ring: EPDM

  • Dimension

    209.5 mm x 40 mm

  • Process temperature

    Process temperature -20 to 85 °C / -4 to 185 °F

    Ambient temperature -20 to 60 °C / -4 to 140 °F

  • Process pressure

    0.5 to 4.5 bar abs.

  • Connection

    G1, NPT3/4

  • Ingres protection

    IP68

Documentos / Manuais / Software

Acessórios / peças sobressalentes

Nr
Order code
Specification